Technical Document

Honda Elite CH80 Carburetor O-Ring Size and Location

Posted Tue, 02/24/2009 - 15:29 by Austin

Using calipers I figured out that the orings needed on the carb are 13/16" ID (inner diameter) and width of 1/16". In Oring lingo this is called a -019 according to the AS568A standard. The Honda dealership wanted about $32 for a gasket kit for the carb that wouldn't even replace both of the orings required.

Honda Elite 1985-2002 80cc (CH80) Service Manual Free (PDF)

Posted Mon, 02/23/2009 - 22:16 by Austin

I searched high and low for this document and have finally found it. So for all those Honda Elite 80 owners I give you the service manual in PDF. So I present to you, the full pdf for free. So this service manual affects the following scooters 1985 Honda Elite 80, 1986 Honda Elite 80, 1987 Honda Elite 80, 1988 Honda Elite 80, 1989 Honda Elite 80, 1990 Honda Elite 80, 1991 Honda Elite 80, 1992 Honda Elite 80, 1993 Honda Elite 80, 1994 Honda Elite 80, 1995 Honda Elite 80, 1996 Honda Elite 80, 1997 Honda Elite 80, 1998 Honda Elite 80, 1999 Honda Elite 80, 2000 Honda Elite 80, 2001 Honda Elite 80, and 2002 Honda Elite 80.

document: 
application/pdf icon
Honda_Ch80_Elite_Motorcycle_1985-2002_Service_Manual.pdf